To configure your Bacnet Ip / MSTP adapter with local Ethernet controller to work simultaneously with your air card you must first configure your IPv4 settings as follows.
Then you want to configure you adapter settings as follows. NOTE : DEFAULT ADAPTER IP SETTING IS 192.168.92.68. ENTER THIS INTO YOUR BROWSER TO PERFORM THE FOLLOWING CONFIGURATION SETTING CHANGES..
After changing your adapters ip address and the default gateway remove the power via usb cable from the adapter then apply power back to the device. Test the adapter by going to "10.0.0.5" in your browser. Or click the hyper link to the left.
This completes the configuration settings needed to simultaneously use your BacNet IP / MSTP adapter with local Ethernet controller and internet air card.